Skip to content 
Double direction thrust ball bearing
Double direction thrust ball bearings can accommodate axial loads in both directions, but they must not be subjected to any radial load. Their separable components facilitate mounting/dismounting and maintenance inspections, and many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit.
| Dimensions | Value |
|---|---|
| Bore diatmeter – d |
15mm |
|
Outer diameter – D |
40mm |
|
Width – B |
26mm |
| Performance | Value |
|---|---|
| Basic dynamic load rating |
21.2 kN |
|
Basic static load rating |
37.5 kN |
|
Reference speed |
4 300 r/min |
|
Limiting speed |
6 000 r/min |
| Properties | Value |
|---|---|
| Metering System |
Metric |
|
ABEC/DIN Rating |
ABEC#3/DINP6 |
|
Number of rows |
2 |
|
Bore Type |
Ball |
|
Material – Ball or Roller |
Bearing steel |
|
Material – Cage |
Bearing steel |
|
Material – Rings |
Bearing steel |
|
Seal Type |
Open |
We and selected third parties use cookies (or similar technologies) for technical purposes, to enhance and analyze site usage, to support our marketing efforts, and for other purposes described in our Cookie Policy
